GENERAL INSTRUCTION FOR INSTALLING MODS FOR CS 1.6

Manual on the installation of models/skins of weapons for CS 1.6

Hello. And today we would like to tell you about how to install weapon models for CS 1.6. In fact, there is nothing complicated and you can install the models in Counter Strike 1.6 in two clicks. First we need the models of weapons. You can download them directly from our website. Download weapon models for CS 1.6. In the archive with the models of weapons can be such files. Now we will consider them.

V_awp.mdl - these are the models that you see in your hands.
W_awp.mdl - models that you see on the ground.
P_awp.mdl - models that you see in the hands of other players.
Awp1.wav - sounds of the model itself.

So, all files with the extension * mdl we need to put in the folder "D: / Counter Strike 1.6 / cstrike / models". Must be a replacement files. We naturally confirm it. Also do not forget that there are models of pistols, knives with shields. They must be placed in the folder "D: / Counter Strike 1.6 / cstrike / models / shield". Usually such files begin with such phrases: "p_shield" or "v_shield". For example, "p_shield_knife.mdl", "p_shield_usp.mdl" and others.

If in the archive with the file there are files with the extension * wav, then the model will have new sounds. Such files must be placed in the folder "D: / Counter Strike 1.6 / cstrike / sound / weapons". After that, there should be a replacement of files, and we also confirm it.

In addition, if there are folders named models or sound in the archive, you can download them into "D: / Counter Strike 1.6 / cstrike" and confirm the merge of folders and the replacement of files. This setup is much simpler and more convenient. But this way you can install only if there are daddy models. In general, that's all, this article on the installation of models of weapons for CS 1.6 is completed.




Manual on the installation of models/skins of plaeyrs for CS 1.6
Unpack the downloaded archive by WinRAR. In the archive there can be a folder: "Models"; Copy and replace it in the directory: Your local drive: \ path to the folder with the game \ cstrike. for example C: \ Games \ Counter-Strike 1.6 \ cstrike Run the game and admire the new skin of the player. If there are no folders, read on: Files with extension *. Mdl copy the name of the skin into the folder C: \ Games \ Counter-Strike 1.6 \ cstrike \ models \ player \ Which is replaced. For example, C: \ Games \ Counter-Strike 1.6 \ cstrike \ player \ sas \. So you replace the skin of the special forces in Gas mask. For example, after unpacking the archive with the Terrorist weapon model, you have the following files: Leet.mdl Copy the file leet.mdl to the folder C: \ Games \ Counter-Strike 1.6 \ cstrike \ models \ player \ leet \. Also with others: Sas.mdl in C: \ Games \ Counter-Strike 1.6 \ cstrike \ models \ player \ sas \.

Explanation of types of models:
1. Terrorist
* Cstrike \ models \ player \ terror \ terror.mdl - the path of the TERROR model-the terrorist No. 1 model (black mask, black and white pants)
* Cstrike \ models \ player \ arab \ arab.mdl - the path of the ARAB model - the terrorist model number 2 (green sweater, sand pants, Glasses)
* Cstrike \ models \ player \ arctic \ arctic.mdl - the way of the ARCTIC model - the model of terrorist No. 3 (black mask, white suit With hood)
* Cstrike \ models \ player \ guerilla \ guerilla.mdl - GUERILLA model path - terrorist model №4 (REMBO - yellow-black
Pants, inflated hands, a red headband)

2. Counter-terrorist
* Cstrike \ models \ player \ urban \ urban.mdl - the path of the URBAN model - the terrorist model number 1 (blue suit, black armor and mask)
* Cstrike \ models \ player \ gsg9 \ gsg9.mdl - the path of the model GSG9 - the terrorist model number 2 (blue suit, black armor, Red-brown helmet)
* Cstrike \ models \ player \ sas \ sas.mdl - the path of the SAS model - the terrorist model №3 (all black, gas mask with Purple glasses)
* Cstrike \ models \ player \ gign \ gign.mdl - the path of the GIGN model - the terrorist model number 4 (blue suit, greenish armor, Gray mask, white badge on the left shoulder)

3. VIP
* Cstrike \ models \ player \ vip \ vip.mdl - model path VIP - VIPa model
4. Hostages
* Cstrike \ models \ hostage.mdl - the path of the HOSTAGE model - the Hostage model (from plumbing to ordinary citizens)
* Cstrike \ models \ scientist.mdl - the way of the SCIENTIST model - the model of the Scientist (the glasses in white coats) The hostages

There are not 2 models, SCIENTIST and HOSTAGE are just groups. There are only 18: 9 scientists and 9 hostages.



Maps Installation Guide for CS 1.6
We are glad to welcome you on our Internet portal. Right now we would like to touch on such an important topic - How to install maps for CS 1.6. Sooner or later you play on the same cards and, as a consequence, you start looking for new maps for CS 1.6. But some people have the same question - How to install maps for CS 1.6? And now we will tell you that yes how, and, in fact, there is nothing difficult. Once you read it, and then you will be able to install maps for CS 1.6 yourself without any help. So, let's get started. First we need a map. Download maps for CS 1.6. You can download the link on the right or find the same on the Internet.

Before we begin the installation, we would like to tell you about what can be the folders in the archive with the penalty and their purpose.

The "maps" folder is the card itself.
The folder "gfx" is the graphic elements of the map.
The "sound" folder is the sounds of the map.
The "models" folder is the new map models.
Folder "sprites" - sprites of the map.

Below you can see the list of files with different extensions and the place where they need to be placed.

The .txt file - "Your server / cstrike / maps"
The .bsp file - "Your server / cstrike / maps"
The .tga file - "Your server / cstrike / gfx / env"
The .wav file is "Your server / cstrike / sound"
The .spr file is "Your server / cstrike / sprites"
The .mdl file is "Your server / cstrike / models"
The .nav file - "Your server / cstrike / maps"
The .res file - "Your server / cstrike / maps"
File .wad - "Your server / cstrike"

Besides all this I want to say one important thing. If there are folders in the archive with the downloaded map: maps, gfx, sound, sprites, models and files with the .wad extension, then all these folders and files can be downloaded to "Your server / cstrike" and confirm the merge of the folders. This is the most simple and convenient way to install maps for CS 1.6, but you want to notice that this method is only valid when there are these folders. (It does not have to be all the folders)

After when you unzip all the files in the necessary folders, open the file "Your server / cstrike / addons / amxmodx / configs / maps.ini" and assign a new name to the card without an extension! Example: awp_india. Next, open one more file "Your server / cstrike / mapcycle.txt" and again, prescribe the name of the installed card without an extension. Installation completed. We wish you a pleasant game. If you suddenly have any questions about installing the card on the server CS 1.6, then ask them in the comments.



Guide for installing sprites for CS 1.6
Unpack the downloaded WinRAR program archive. In the archive there can be a folder: "Sprites";

Copy and replace it in the directory: Your local drive: \ path to the folder with the game \ cstrike. for example
C: \ Games \ Counter-Strike 1.6 \ cstrike \.

If there are no folders, read on:
Files with the extension * .spr copy to the folder C: \ Games \ Counter-Strike 1.6 \ cstrike \ sprites \.

For example, after unpacking the archive with a shot, you have the following files:
Muzzleflash1.spr
Muzzleflash2.spr
Muzzleflash3.spr
Muzzleflash4.spr

That means you downloaded the sprite shot. Copy all these files to the folder C: \ Games \ Counter-Strike 1.6 \ CStrike \ sprites \.



Manual installation of textures and gloves for CS 1.6
Attention, for each weapon model you need to install gloves separately!

Unpack the downloaded archive. AT
The archive can be a folder:
"Textures"; - A folder with the textures (gloves).

Inside the folder can be the following files: hands.bmp - the texture of the gloves.
Finger.bmp - texture of fingers.
Skin.bmp - texture of sleeves (hands).

If the name of the files is different, then this is not a glove, you should yourself understand what kind of texture it is and replace it with another texture using the instructions below.

To install new textures / gloves, download the Half-Life Model Viewer.

Install it and run, then follow the instructions:
1.Open the file with the weapon model for which you want to change the gloves with this program (second click on v_ * model> open with ...> overview> and select the EXE file of the downloaded program).
2. At the bottom of the program, select the "Textures" tab.
3. In the drop-down menu, select the file view_glove.bmp.
4. On the right, click "Import Texture" and select the file hands.bmp unpacked from the archive with gloves.
5. Then in the drop-down menu, select view_skin.bmp, click "Import Texture" and select the file skull.bmp.
6. Then in the drop-down menu, select view_finger.bmp, click "Import Texture" and select file finger.bmp.
7. Click the Save Model button, which is located under the "Import Texture" button.
Done. Perhaps some files do not have to be replaced unless they are in the glove file.
Copyright © 2017 All rights reserved.